Metfone 3g Modem Software Download

How to Download and Install Metfone 3G Modem Software on Your PC

Metfone 3G is a mobile data service provided by VIETTEL Corporation in Cambodia. It allows users to access the internet at high speeds on their mobile devices. However, if you want to use Metfone 3G on your PC, you will need a compatible modem and software to connect to the network.

In this article, we will show you how to download and install Metfone 3G modem software on your Windows PC. You will need a Metfone 3G SIM card and a USB modem that supports Metfone 3G network. You can buy these from any Metfone store or authorized dealer.

Step 1: Download Metfone 3G Modem Software

The first step is to download the Metfone 3G modem software from the official website of Metfone. You can find the link in the web search result [^1^]. Alternatively, you can also download it from Software Informer, a trusted source of software downloads. You can find the link in the web search result [^2^].

Depending on the version of your modem, you may need to download either Metfone 3G version 16.0 or version 21.0. The file size is about 30 MB and it is compatible with Windows XP, Vista, 7, 8 and 10. The software is free and does not require any registration or activation.

Step 2: Install Metfone 3G Modem Software

The second step is to install the Metfone 3G modem software on your PC. To do this, follow these steps:

Locate the downloaded file and double-click on it to run the setup wizard.

Follow the on-screen instructions and accept the terms and conditions.

Select the destination folder where you want to install the software.

Wait for the installation process to complete.

Click Finish to exit the setup wizard.

The installation process may take a few minutes depending on your PC specifications. Once it is done, you will see a shortcut icon of Metfone 3G on your desktop.

Step 3: Connect to Metfone 3G Network

The final step is to connect to Metfone 3G network using your modem and software. To do this, follow these steps:

Insert your Metfone 3G SIM card into your USB modem.

Plug your USB modem into an available USB port on your PC.

Wait for your PC to detect and install the drivers for your modem.

Launch the Metfone 3G software from your desktop or start menu.

Enter your PIN code if prompted.

Click Connect to start browsing the internet.

You can check your connection status, signal strength, data usage and balance on the software interface. You can also send and receive SMS messages using the software. To disconnect from the network, simply click Disconnect or unplug your modem.

Troubleshooting Tips

If you encounter any problems while using Metfone 3G modem software, here are some tips that may help you:

Make sure your SIM card is active and has enough balance.

Make sure your modem is compatible with Metfone 3G network and has the latest firmware.

Make sure your PC meets the minimum system requirements for running the software.

Make sure you have installed the correct version of the software for your modem.

Make sure you have a good signal reception in your area.

Restart your PC and modem if necessary.

Contact Metfone customer service if you need further assistance. 248dff8e21